Choosing a vacuum emulsifier machine manufacturer is really an audit of process evidence: particle fineness, cleaning access, honest capacity numbers and electrical integration. Hold the same standard against every candidate when you compare vacuum emulsifying mixer machine suppliers who quote similar 200L–5000L ranges but rarely publish configuration detail. This guide treats PROMAKE's hydraulic-lifting PMK-A series as a working model — each claim below maps to a specification option or buyer decision you can verify before you issue an RFQ.

Audit the PMK-A 200L–5000L Specs Discuss Your Plant with an Engineer

Hydraulic Lifting Vacuum Emulsifier 200L to 5000L,Promake Machinery Equipment,Hydraulic Lifting Vacuum Emulsifier 200L to 5000L

RFQ checklist

Five questions to ask any vacuum emulsifier supplier before you shortlist

Audit suppliers the way your customers audit you: ask for evidence that survives a plant visit. Use these questions side by side in your RFQ. The right column shows what PROMAKE publishes for the PMK-A hydraulic-lifting series.

Can you prove the particle size and texture consistency your machine will actually hold?

Ask whether the claimed fineness was measured on products like yours, not on a laboratory sample. Creams, lotions and ointments all demand a narrow, repeatable particle distribution.

What PROMAKE shows

The PMK-A product specification states that particle fineness can reach up to 1 µm and that the homogenizer motor speed is adjustable — alongside a vacuum stage aimed at improving emulsion stability and quality.

How do operators reach the product-contact surfaces between batch changeovers?

If you run short campaigns, multiple SKUs or frequent colour changes, cleanability is a production-efficiency metric — not a hygiene footnote. Ask where the vessel opens and what tooling is required.

What PROMAKE shows

The series name is also its answer: hydraulic lifting supports operational handling and cleaning, and the product page calls out the mechanism as a way to facilitate easier cleaning and maintenance — exactly the access a changeover-intensive buyer needs.

Does the supplier understand your formulation family — cream, lotion, ointment or paste?

Emulsifiers are not universal. Toothpaste, ointment, lotion and detergent pastes behave differently under vacuum, shear and heat. A supplier should be able to name the product types their machines are positioned for.

What PROMAKE shows

The PMK-A targets cosmetics, pharmaceuticals and chemical production, with application fit for emulsified creams and lotions that demand consistent particle size and uniform texture, as well as broader line contexts extending to toothpaste and detergent production.

Is the quoted capacity a truly usable effective volume, or just a nominal tank label?

Nominal litres do not tell you how much finished batch you can discharge. Ask for the main-tank effective volume, how wall thickness is specified, and which model sits closest to your real batch weight.

What PROMAKE shows

Instead of one generic machine, PROMAKE lists seven stepped models and its parameter table separates main-tank effective volume and main-tank wall thickness — giving a buyer the language needed to check capacity realism.

Can the machine fit your plant's automation, power, wiring and full production line without rework?

The cheapest machine becomes expensive when you add a transformer, a new control philosophy or a second supplier for water treatment and holding tanks. Check control, voltage and line integration before price.

What PROMAKE shows

PROMAKE configures the PMK-A with multiple control methods and power-supply variants, and its wider verified catalog includes one-stage and two-stage RO water treatment systems plus storage tanks — practical evidence for one-stop line supply.

Configuration evidence

What an auditable supplier configurator should include

A genuine equipment manufacturer offers configuration rather than forcing your process into a stock cabinet. The PMK-A product page exposes the following variation groups, so a buyer can match the machine to plant reality before asking for a quote.

Specification area	Published PMK-A choices
Machine models	PMK-A200L · PMK-A300L · PMK-A500L · PMK-A1000L · PMK-A2000L · PMK-A3000L · PMK-A5000L
Heating jacket	No jacket layer / electric heating jacket / steam heating jacket
Control method	Automatic PLC + touchscreen / semi-automatic pneumatic with button panel / semi-automatic electric with button panel / manual / explosion-proof control box + explosion-proof wiring / remote monitoring interface / intelligent control networking
Supporting base	Fixed base bracket basic set / fixed base with weighing system and adjustable leveling feet / movable base with casters and wheels
Safety protection	Complete set of external cover plates / front external cover plate only / without external cover plates
Installation space	Vertical main stirring motor base / horizontal main stirring motor base
Electrical supply	380V/50Hz three-phase five-wire standard; options include 400V/230V-50Hz, 480V/208V-60Hz, 380V/200V-50Hz/60Hz, 415V-50Hz, 220V-50Hz 1-phase, 110V-50Hz 1-phase and others
Wiring configuration	TN-S / 3-phase 4-wires, Y/Δ TN-S / 3-phase 4-wires, TN-C-S / 3-phase 5-wires, 1-phase 3-wires

Scenario mapping

Connect your production scenario to a PMK-A specification

These are representative build paths based on the configuration choices published on the product page. Use them as a starting point — then confirm batch chemistry, heating load and local electrical standards with the manufacturer.

Scenario 01 — Diversified cream & lotion producer

Frequent SKU changes, smaller qualified batches

Short production runs reward a machine that is quick to clean and easy to re-configure. The hydraulic lift gives operators access for changeover, while the compact end of the model range keeps utility demand proportionate.

Starter build

PMK-A200L or PMK-A300L
Electric heating jacket
PLC + touchscreen control
Fixed base with adjustable leveling feet

Scenario 02 — Pharmaceutical ointment / controlled-area production

Fine emulsification with stability and safety review

Ointments and semi-solid pharmaceuticals require consistent fineness and minimal air inclusion. Where solvents or hazardous areas are involved, an explosion-proof control box and wiring configuration is an available PMK-A option.

Controlled-area build

PMK-A500L or PMK-A1000L
Steam or electric heating jacket
Explosion-proof control box + wiring
Full set of external cover plates

Scenario 03 — High-volume daily chemical & perfume line

Continuous campaigns, large batch weights

Long campaigns shift the priority to throughput, thermal efficiency and repeatable automation. Larger PMK-A models accept higher-volume batches, and multi-region power options help when the line must run on 50 Hz or 60 Hz plant networks.

High-output build

PMK-A2000L to PMK-A5000L
Steam or electric heating jacket
PLC + touchscreen with weighing base
400V/480V three-phase 50/60 Hz option

Scenario 04 — Paste, detergent & toothpaste line environments

Paste-like materials inside a broader process line

Paste products add viscosity and recipe complexity. PROMAKE places the PMK-A in production contexts extending from detergent lines to toothpaste lines, and pairs it with a wider catalog of water treatment and storage equipment for buyers building a complete process.

Line-integrated build

PMK-A sized to final batch weight
Electric or steam heating jacket
Horizontal main stirring motor base
Pair with RO water treatment + storage tanks

Supplier response

Turn this vetting guide into an RFQ

Send PROMAKE your formulation type, target batch size, heating preference and plant power specification. The product page lets you select variations and inquiry quantity directly, while the contact route connects you with an engineer who can review the details.

OEM/ODM customization and batch production support
Explosion-proof and hazardous-area configurations
110V–480V, 1- and 3-phase power options
Product page downloads available before quoting

Frequently Asked Questions

what information is shown for this product?

review the product details, images, and specifications presented on the official product page.

where can i check the intended application?

use the application and use-case information published on the official product page.

which specifications should i confirm before ordering?

confirm the specifications and options listed for the exact product variant before placing an order.

where can i check available options?

check the official product page or ask the supplier about options shown for the selected product.

how can i request product information?

use the official contact or inquiry path provided on the site.

what should i include in an inquiry?

include the product page, intended use, required quantity, and any specifications you need the supplier to review.

Founded in 2009, Guangzhou Promake specializes in R&D, production and sales of machinery for daily chemical, pharmaceutical, food and water treatment industries. Driven by innovation and quality excellence, we have won trust from renowned brands worldwide.

Home: All News; Blog; All Cases; Certificates

Products guide: Emulsifying Machinery; Mixing Tanks; Storage Tanks; Filling Machinery; Packing Machines list page; RO Water Purification Systems; Auxiliary Equipment

Contact Us: Building 8, Hongxin Industrial Park, No.35 Jinghu Avenue, Huadu, Guangzhou, Guangdong 510800, China.; walt@promake.com.cn; +86-18922724832 (Whatsapp/Wechat)

Newsletter

Don't miss our news subscription, please fill in the form below.

Leave a message

Name*

Email*

Phone/Whatsapp

Message

File Upload

Verification Code*

Click to verify

How to Vet Vacuum Emulsifier Equipment Suppliers

How to Vet Vacuum Emulsifier Equipment Suppliers

Five questions to ask any vacuum emulsifier supplier before you shortlist

Can you prove the particle size and texture consistency your machine will actually hold?

How do operators reach the product-contact surfaces between batch changeovers?

Does the supplier understand your formulation family — cream, lotion, ointment or paste?

Is the quoted capacity a truly usable effective volume, or just a nominal tank label?

Can the machine fit your plant's automation, power, wiring and full production line without rework?

What an auditable supplier configurator should include

Connect your production scenario to a PMK-A specification

Frequent SKU changes, smaller qualified batches

Fine emulsification with stability and safety review

Continuous campaigns, large batch weights

Paste-like materials inside a broader process line

Turn this vetting guide into an RFQ

Related Products

RO Water Treatment System, one stage

RO Water Treatment System, two stages

Storage tanks

Related Reading

Why Hydraulic Lifting Vacuum Emulsifiers Are Easier to Clean and Inspect-Promake Machinery Equipment, Manufacturer for Vacuum Emulsifier, mixing tank, customized OEM ODM Industrial production line, industry solution

Vacuum Emulsifiers for Creams, Ointments, Toothpaste, and Pastes-Promake Machinery Equipment, Manufacturer for Vacuum Emulsifier, mixing tank, customized OEM ODM Industrial production line, industry solution

Reading Vacuum Emulsifier Main Tank Capacity from 200L to 5000L-Promake Machinery Equipment, Manufacturer for Vacuum Emulsifier, mixing tank, customized OEM ODM Industrial production line, industry solution

Frequently Asked Questions