Fixed Vacuum Emulsifying System 200L to 10000L

Fixed Vacuum Emulsifying System 200L to 10000L

Built for mid-to-high-end industrial production, this fixed unit works as a high-shear vacuum emulsifier that brings pastes, creams and lotions to a consistent emulsion, and the same platform is a complete vacuum emulsifying machine for batch volumes from 200L through 10000L, with electric or steam heating jackets and PLC touchscreen or pneumatic control.

Fixed vacuum emulsifying unit with fixed base bracket and control panel
Fixed base emulsifying system sized from 200L to 10000L

A Fixed Platform Built for Repeatable Batches

The Fixed vacuum emulsifying machine 200L to 10000L targets mid-to-high-end industrial production that requires consistent emulsification of pastes, creams, lotions and similar products. Main tank capacity runs from 200L up to 10000L, and the fixed base design keeps the vessel stable while the batch is processed under vacuum.

Fixed vacuum emulsifying unit with fixed base bracket and control panel
Fixed base arrangement with the main tank, jacket and control panel on one frame

The unit is intended for high-viscosity materials such as skin care creams, pharmaceutical ointments and chemical pastes, and it also handles food and industrial emulsions that need a controlled vacuum environment together with good thermal efficiency. Vacuum emulsification brings particle size down to around 1 μm.

Motor power scales with tank size, so the drive matched to a small vessel is not the drive used on the largest one. The model line covers PMK-200L, PMK-300L, PMK-500L, PMK-1000L, PMK-2000L, PMK-3000L, PMK-5000L and PMK-10000L, and selectable main tank effective volume choices include 5000L and 10000L.

  • CapacityMain tank range from 200L to 10000L
  • EmulsificationVacuum process with particle size around 1 μm
  • HeatingElectric heater jacket, steam jacket, or no jacket layer and no heating
  • ControlPLC touchscreen, pneumatic drive, button panel or manual
  • SafetyExplosion-proof control box and explosion-proof wiring method
  • MonitoringRemote monitoring interface with intelligent control networking function

Specifications and Selectable Options

Each row below is a configuration choice offered for this model line. Selections are made on the product page before a quote is requested, so the table doubles as an ordering checklist.

Main tank capacity 200L – 10000L
Model designations PMK-200L, PMK-300L, PMK-500L, PMK-1000L, PMK-2000L, PMK-3000L, PMK-5000L, PMK-10000L
Main tank effective volume choices 5000L and 10000L shown as selectable options
Vacuum emulsification Particle size around 1 μm
Heating jacket No jacket layer and no heating; heating jacket with electric heater; heating jacket with steam
Control method Automatic PLC + touch screen; automatic pneumatic drive; semi-automatic pneumatic drive with button panel; semi-automatic electric drive with button panel; manual
Explosion protection Explosion-proof control box with explosion-proof wiring method
Monitoring and networking Remote monitoring interface; intelligent control networking function
Supporting base Fixed base bracket, basic set; fixed base bracket with weighing system and adjustable levelling feet; movable base with casters and wheels
Safety protection base Complete set of external cover plates; front external cover plate only; without external cover plates
Electric power supply 400V/230V 50Hz three phase; 480V/208V 60Hz three phase; 380V/200V 50Hz three phase; 380V/200V 60Hz three phase; 415V 50Hz three phase; 220V 50Hz single phase; 110V 50Hz single phase; others
Installation space Vertical main stirring motor base; horizontal main stirring motor base
Wiring configuration TN-S / 3 phases 4 wires; Y / △ TN-S / 3 phases 4 wires; TN-C-S / 3 phases 5 wires; 1 phase 3 wires
Fixed vacuum emulsifying machine 200L to 10000L,Promake Machinery Equipment,Fixed vacuum emulsifying machine 200L to 10000L
Motor base orientation, jacket type and vessel connections are all selectable

Motor power is matched to tank size rather than published as a single figure, and no dimensions, weights or cycle times are listed as fixed values across the range. Confirm the final numbers for the exact model you intend to order.

Choosing Between the Configuration Options

The option groups below decide how the unit heats, how operators run it, how it stands on the floor and how it is wired. Matching them to your plant early avoids rework later.

Heating jacket

No jacket layer means no heating, which suits ambient-temperature processing. A heating jacket with an electric heater is the route when no steam line is available. A heating jacket with steam is the choice where a boiler already supplies the line and thermal efficiency across large batches matters.

Control method

Automatic PLC + touch screen supports repeatable recipes and automated runs. Automatic pneumatic drive, semi-automatic pneumatic drive with button panel, semi-automatic electric drive with button panel and manual control cover simpler or more hands-on set-ups. An explosion-proof control box with explosion-proof wiring is offered for demanding environments.

Supporting base

The fixed base bracket basic set is the standard arrangement. A fixed base bracket with weighing system and adjustable levelling feet adds batch weighing and floor levelling. A movable base with casters and wheels is listed for lines that need to reposition the vessel between areas.

Safety protection base

Cover plate options are a complete set of external cover plates, a front external cover plate only, or no external cover plates. The choice sets how much guarding surrounds the vessel in the installed position.

Power supply and wiring

Voltage options cover three-phase supplies at 400V/230V, 480V/208V, 380V/200V, 415V and single-phase supplies at 220V and 110V, plus other arrangements on request. Wiring configurations are TN-S, Y / △ TN-S, TN-C-S and 1 phase 3 wires.

Installation space

The main stirring motor base can be specified as vertical or horizontal, which changes the headroom and the footprint the unit needs in the room. Remote monitoring and intelligent control networking can be added when the line reports to a central system.

Where This Emulsifier Fits in Production

The platform is positioned for bulk production and OEM/ODM work, and it accommodates a broad range of viscosities and material types across the following lines.

Cosmetic cream production line

Skin care creams and similar high-viscosity products are the core application. The hygienic design is aligned with cosmetic cream production line standards, and the vacuum circuit keeps the batch under controlled conditions through emulsification.

Daily chemical production line

Daily chemical products and chemical pastes that need uniform dispersion fit the same platform, with the fixed base keeping the vessel steady while the batch is mixed and homogenised.

Lotion production line

Lotions run at lower viscosity than creams but still rely on a stable emulsion. The selectable heating jacket and control method let the same model serve several lotion recipes on one line.

Detergent and toothpaste lines

Detergent and toothpaste production are both listed applications. Larger tank sizes suit bulk output, while the fixed base and the available weighing system help keep repeat batches consistent.

Pharmaceutical ointments

Pharmaceutical ointments are named among the high-viscosity materials the unit is intended for. Explosion-proof control and remote monitoring are available where the installation calls for them.

Food and industrial emulsions

Food and industrial emulsions that require controlled vacuum environments and thermal efficiency are also within scope. The steam jacket option supports the thermal side of those processes.

What to Confirm Before Ordering

A short checklist keeps the configuration request complete and avoids back-and-forth on the order.

  • Confirm the main tank capacity and the exact model designation, from PMK-200L through PMK-10000L, including the effective volume you need.
  • Confirm whether the unit runs with no jacket layer, an electric heater jacket or a steam jacket, and whether steam supply is available on site.
  • Confirm the control method: automatic PLC + touch screen, automatic pneumatic drive, semi-automatic with button panel, or manual.
  • Confirm whether an explosion-proof control box and explosion-proof wiring method are required for the installation area.
  • Confirm the supporting base and safety protection base, including whether a weighing system, adjustable levelling feet, casters or external cover plates are needed.
  • Confirm the electric power supply, phase and frequency, the wiring configuration, and whether the main stirring motor base should be vertical or horizontal.
  • Confirm whether a remote monitoring interface and intelligent control networking function should be included in the scope.

Configure Your Unit and Request a Quote

Send the tank size, jacket type, control method, base, power supply and wiring configuration you need, and the supplier can price the exact build.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

Steam Jacket Vacuum Homogenizer for High-Volume Cream Batches-Promake

A steam jacket vacuum homogenizer fits high-volume cream production when the existing boiler can deliver dry steam at stable pressure and the condensate return can clear the jacket during the heat-up…

Read article

PLC Touch Screen Vacuum Cream Mixers for Automated Production

Control configuration determines how an automated cream and lotion line runs from batch to batch.-Promake Machinery Equipment, Manufacturer for Vacuum Emulsifier, mixing tank, customized OEM ODM…

Read article

How Fixed Vacuum Emulsifiers Use Water and Oil Phase Tanks-Promake

A fixed vacuum emulsifying machine splits one batch across three vessels so each ingredient group is prepared at the right temperature before the emulsion forms once, under vacuum.-Promake Machinery…

Read article

Frequently Asked Questions

what tank capacities and models are available?

main tank capacity ranges from 200l to 10000l. the listed models are pmk-200l, pmk-300l, pmk-500l, pmk-1000l, pmk-2000l, pmk-3000l, pmk-5000l and pmk-10000l, and selectable main tank effective volume choices include 5000l and 10000l.

what particle size does vacuum emulsification reach?

vacuum emulsification on this platform achieves particle sizes around 1 μm, a fineness suited to creams, lotions, ointments and pastes processed under vacuum.

which heating jacket options can i select?

three choices are listed: no jacket layer and no heating, a heating jacket with an electric heater, and a heating jacket with steam.

what control methods are offered?

options include automatic plc + touch screen, automatic pneumatic drive, semi-automatic pneumatic drive with button panel, semi-automatic electric drive with button panel, and manual control. an explosion-proof control box with explosion-proof wiring method is available, and a remote monitoring interface with intelligent control networking function can be supplied.

what base and safety protection options are available?

supporting base options are a fixed base bracket basic set, a fixed base bracket with weighing system and adjustable levelling feet, and a movable base with casters and wheels. safety protection base options are a complete set of external cover plates, a front external cover plate only, or no external cover plates.

which power supply and wiring configurations are listed?

electric power supply options include 400v/230v 50hz three phase, 480v/208v 60hz three phase, 380v/200v 50hz three phase, 380v/200v 60hz three phase, 415v 50hz three phase, 220v 50hz single phase, 110v 50hz single phase and other arrangements. wiring configurations are tn-s / 3 phases 4 wires, y / △ tn-s / 3 phases 4 wires, tn-c-s / 3 phases 5 wires and 1 phase 3 wires, with either a vertical or horizontal main stirring motor base.

Dalian Sanli holds cosmetics and health-food production licenses and also makes disinfectants, sanitary products, disposable medical supplies, and Class I medical devices — all under ISO9001, ICTI, ETI, and GMP certifications. PROMAKE delivered a front-to-back line that satisfies the strictest of these categories: vacuum emulsifiers upstream, a flexible packaging hall downstream, sized for [50] tons per month. A Multi-Qualification Challenge......
For Yaolin in Zhongshan — a Hong Kong-owned manufacturer of bathroom-care products (including electric toothbrushes) and cosmetics — PROMAKE delivered a full production system to match its audit-grade standards: a large stainless tank farm, a raised emulsification platform, a fully labelled process rack, and local HMI control. The line is built for [10,000] L per batch and around [500] tons per month, and designed to be walked by customers and auditors on day one. ...
When a peptide-based skincare maker in eastern Guangdong outgrew its manual, batch-by-batch process, it came to PROMAKE with a clear goal: one cleanroom, one integrated line, and a step change in batch consistency. The plant now runs vacuum-emulsified serums, lotions, and peptide formulations from a single, easy-to-clean suite — designed for [4,000] L per batch and around [200] tons per month of finished product. The Challenge..........
Vinda, the tissue and personal-care leader, needed a small-batch emulsifier that could reproduce the texture of its high-volume wet-wipe, cotton-soft, and lotion lines on the lab bench. PROMAKE delivered a bench-top vacuum emulsifier paired with two compact holding tanks — small enough for a cleanroom corner, rigorous enough to de-risk every new formulation before it reaches production. Why Lab-Scale Matters......
When a Chinese manufacturer needed reliable mixing and blending inside a cleanroom that simply had no room for a full line, PROMAKE built a compact three-vessel platform. It packs blending, heating, and homogenizing into one pre-assembled skid sized for [1,000] L per batch — proof that small floor space does not have to mean compromise on process.

OTHER PROCESS EQUIPMENTS

From the pre-treatment of raw materials to the refined two-stage and three-stage processing of the finished products, from temporary storage, to the internal filling stage, to the internal packaging stage, we can provide you with the necessary process stage design and ODM/OEM equipment to meet your various production and manufacturing needs.

STORAGE TANK

FILLING ANC CAPPING

RO WATER TREATMENT

PACKAGING

AUXILIARY EQUIPMENT

Leave a message
Name*
Email*
Phone/Whatsapp
Message
File Upload
Verification Code*
Click to verify